Spotty Rules Govern Crane Industry

35 States Don't Require Operators To Be Licensed, Rules Vary Wildly From City To City And State To State

(AP)  Dan Mooney has no idea what it will take for his construction cranes to pass inspection.

The crane company owner recently asked New York City officials for a list of safety hazards that inspectors look for. He was told that information wasn't public.

"How am I supposed to know what I need if you won't tell me?" Mooney asked. "It's like not posting the speed limit."

In 35 other states, crane companies face a different problem: Operators don't need licenses of any kind.

An Associated Press analysis found that cities and states have wildly varying rules governing construction cranes, and some have no regulations at all, choosing instead to rely on federal guidelines dating back nearly 40 years that some experts say haven't kept up with technological advances.

Crane safety is getting extra scrutiny following an alarming number of crane-related deaths in recent months in places such as New York, Miami and Las Vegas. In New York City, two crane accidents since March have killed nine people - a greater number than the total deaths from cranes over the past decade.

Many states have no count of their cranes, nor do they mandate training for workers who run the equipment, or for officials who certify crane operators. Even the federal government acknowledged last month that updated standards would prevent some crane accidents.

New York City has only four inspectors on the payroll to inspect more than 200 cranes, 26 of them large tower cranes. About four inspections are conducted each day, a routine that one 40-year industry veteran said won't detect real problems such as the rebuilt crane part blamed for a crane collapse last month.

"That's impossible," said Ron Brodek, an inspector from Chandler, Ariz. "You're just looking through the paperwork then. It's a drive-by inspection."

The crane standards of the Occupational Safety and Health Administration were last updated in 1971. They require cranes to be inspected once a year. But most of the inspections never happen. OSHA, which is part of the Labor Department, inspected only about 23,000 of the country's some 4 million construction sites last year.

Labor Department spokeswoman Sharon Worthy said she didn't know how many of those sites had cranes, but the federal government last year issued $500,000 in annual penalties for crane violations.

Updating the regulations, Worthy said, "is a top regulatory priority" for the agency. But approving the rules could still take more than a year after the Labor Department finishes an internal review of the proposed new regulations.

Running a crane is among the most highly specialized skills in construction. Operators of tower cranes, like the two that collapsed into Manhattan residential neighborhoods, cannot see the loads they're picking up and must use a radio to communicate with workers on the ground.

One wrong move can bring tragic consequences. In March, two construction workers in Florida were killed when a crane plummeted 30 stories onto a condo project, damaging the home used in the movie "There's Something about Mary." More than 50 people have died in crane accidents in Florida over the past decade.

"There's certification for your plumbers, your pipe fitters," said John Lindsey, a crane operator and treasurer of his union local in Jefferson City, Mo. "Why in the heck won't they hear about certification for your operators?"

Bruce Whitten, chairman of the Florida Crane Owners Council, bemoaned the state's lack of licensing requirements for crane operators.

"Anyone can operate a crane," he said. "I can take you over there and you can go operate a crane."

But Whitten was among industry leaders who sued to block Miami-Dade County crane ordinances enacted last spring that would have required that operators be licensed and that cranes withstand wind speeds of 140 mph. The lawsuit said none of the 200 cranes operating in the county could meet the standard.

Florida lawmakers introduced a bill that reduced the wind speed limit to 120 mph and required a national operator's test, but Miami-Dade legislators blocked it, saying it would weaken local standards.

After the March 15 crane collapse in Manhattan that killed seven people, Dallas checked its 23 cranes and found that eight had uncertified operators at the controls.

In states that only go by OSHA standards, annual crane inspections are largely a matter of self-policing by crane owners. Federal law requires that inspection records be kept, but not submitted. Some owners cut corners and avoid the inspections.

"There are people who don't do it because they know their machinery will not pass code," said John Alexander, an inspector for Cranetex Services in Austin, Texas. "There are people who will give the excuse that they can't afford it."

Even if regular inspections were conducted, the federal standards have not evolved to address equipment that is twice the size of cranes used in the 1970s and uses computers, Alexander said.

California, with some of the toughest crane regulations in the nation, has required independent inspections of equipment for decades.

After an 1989 tower crane accident killed five people in San Francisco, the state began requiring twice-a-year inspections and mandating that operators submit drawings of the crane's placement before receiving a permit. Since then, no one has died in a tower crane accident, said Roy Berg, a regional manager with the state Division of Occupational Safety and Health.

Third-party inspections are also required in Nevada, and crane contractors are responsible for maintenance and daily inspections. Before May 31, when a worker was crushed by a moving crane at a Las Vegas Strip megaresort under construction, the state hadn't had a crane accident in 14 years.

Independent inspections are being considered in New York City, but they were not among more than a dozen construction safety rules proposed last week. The city did propose training for crews who assemble cranes. Some of them were killed March 15 while trying to extend a crane in Manhattan. Investigators have focused on a broken nylon strap that held the steel and the way the workers were installing it.

The city's Department of Buildings couldn't say what is covered in a normal inspection, saying release of that information would interfere with criminal investigations under way into the latest crane collapse.

The confusing regulations sometimes contribute to other problems: On Friday, an assistant chief crane inspector was charged with falsifying inspection reports and tampering with exams, although the charges weren't related to the latest collapse.

That reduced the city's number of crane inspectors on the payroll from five to four, although the city says it's getting other help from other buildings inspectors until more crane inspectors are hired.

In April, New York's inspector general also found that a state employee approved crane operator licenses for more than 200 people who had failed a state licensing exam.

Without updated standards that are enforced equally around the country, industry experts fear that deadly accidents will continue.

"Now that cranes have really come into play in the mind's eye with all of these accidents, maybe we'll get somewhere," said Lindsey, the Missouri crane operator. "We've got a lot of lives in our hands when swinging one of those things around."

[ajaxtheleast]

DOG RULES GOVERNING A BIRD INDUSTRY

AND THEY WONDER WHY THEY GOT PROBLEMS.

[pollroller1]

I think the government should stay out of the crane inspection business. Let the lawyers handle it.

[neobrian-2009]

whatinthewld Is a TRUE MORON
Lou Dobbs tries to do his homework before speaking,..this chick,just babbles on,Not Knowing Anything about the Subject matter,..a Brainwashed Shrubbie for Sure,..Pathetic !

[cyberus-2009]

----
The crane company owner recently asked New York City officials for a list of safety hazards that inspectors look for. He was told that information wasn''t public.
----

Now we know why its so easy to get bribes ... you HAVE to pay the inspector to not get written up since you have no clue as to what the standards are.

[whatinthewld]

There you go, gravity..........I like that

[feelfree4u]

I suspect that gravity is at least partly to blame here.

[whatinthewld]

"New York City has only four inspectors on the payroll to inspect more than 200 cranes, 26 of them large tower cranes. About four inspections are conducted each day,"

How long does it take to inspect a crane?
1. 200 cranes divided by 4 inspectors = 50 cranes
2. 250 work days for gov''t employee divided by 50 cranes is 5 days per crane
3. 5 days x 8 hours = 40 hours per crane

Will it take 40 HOURS to inspect EACH average crane?

Next they say that 4 inspections are conducted each day. There is no way one guy can inspect 50 cranes 4 times a day, but the operator should be trained to inspect his crane 4 times a day.
Road construction workers do it, school bus drivers are expected to safety check their own bus, pilots do safety checks on their airplane before they fly it.........what''s wrong with crane operators checking their own equipment?
Inspectors check school buses once a year, bus drivers turn their bus in to the shop for repairs....pilots report problems to the airplane mechanics......inspectors should be expected to do routine checks, but the company and the operator is responsible for the regular upkeep and safety of the equipment. CBS News........it time to go look for other news items that we care about. My blood pressure is getting high! Blaming the gov''t for such stupid things get''s be worked up!!!#@@#$

[jpb1051]

Don''t just blame the tower cranes. Hydraulic Cherry Pickers, and older Lattice Boom Crawler Cranes probably kill or injure scores more of construction Tradesmen. The causes? Unskilled, untrained, Operators and the bosses good Operators have to put up with bosses, who know NOTHING about cranes who want the job done NOW! I was an Operator who walked off many jobs rather than take the risk of killing myself or the Tradesmen working with me. I had a boss who INSISTED I get closer than legally allowed to 40kv high-tension lines. Well we finally got close enough where it arced and sent 40 thousand volts through a Laborers''body. Miraculously he lived, although he was injured beyond belief.I complained CONSTANTLY to the Companies'' Safety Supervisor who himself knew absolutely NOTHING about Crane Safety.
OSHA is the biggest joke in the Construction Trades. But they are Johnny-on-the-spot when a high profile accident occurs.Not only should all Operators be liscensed, but also Safety Supervisors. If the Companies refuse to run safe rigs, shut them down. Most Unions do a great job of training their Operators, but every State is a little different. These are tremendously well-paying jobs and if you feel a lift is dangerous, well too bad. There is a line of so-called Operators from Right-to-Work States who will gladly take your job away from you. Some jail time for these fly by night unliscenced, unregulated deadly scabs and their bosses who give the orders might wake this country up.

[whatinthewld]

Who in the GOV''T for crying out loud, is going to train crane operators?
DO you really want congress making rules for how to maintain a crane?
What is CBS news trying to cover up and not report on, when such a STUPID issue is the HEADLINE OF THE NATIONAL NEWS!!!???? %$#@&&&&^%$#@

[whatinthewld]

Oh my goodness!! These guys must be liberals!! They own their own cranes and for 8 years now, the govn''t has given them the benefit of the doubt that they woudl have the brains to take care of their own equipment and hire /train responsible crane operators..........now their crying " the gov''t doesn''t have any regulations in place, so how should we know what to repair?"

Good grief guys, ....go stock milk at a grocery store!

[harrydoghiny]

This is the top story because? Anyone care to report on what happened in Congress yesterday?

[republic1776]

The Crane Mfgrs should give the saftey requirements and safe operation configurations.

We''ll be tax to death if we keep asking Uncle Sam to solve our problems.

America is turning into a bunch of lame liberal sheep!

[samrensho]

Safety standards and regulations reduce profits so of course they are spotty. This is the GOP way. For every worker that is killed or maimed that spells one more job opening which reduces unemployment. Win win.

[feelfree4u]

Unrelated-

"Taser Loses 1st Product-Liability Suit; Jury Awards $6 Million"

www.bloomberg.com/apps/news?pid=20601103&sid=aYJitFRQLpZk&refer=us

"June 7 (Bloomberg) -- Taser International Inc., the largest stun-gun maker, lost a $6.2 million jury verdict over the death of a California man who died after police shot him multiple times with the weapon. The defeat is the first for Taser in a product- liability claim."

###

In my very best "Nelson" voice- "HA, ha!"